Vinyl siding has gained immense popularity and approval because of its beautiful décor, durability, and simplicity. It is incredibly versatile, easy to install, and quite affordable.
Vinyl siding is also the preferred choice for many home builders and owners because it reduces the costs of home heating and cooling through a phenomenon referred to as “thermal bridging.”
Given it’s lightweight, vinyl siding is remarkably resistant to high wind. The main component of vinyl siding is polyvinyl chloride which makes vinyl inherently flame-retardant.
If you have decided to upgrade your home by introducing vinyl siding, here are some of the most important factors to consider before the actual installation:
Get a Free Estimate
When looking for the best Minnesota siding contractor, always ask for a free estimate to understand the costs of the project beforehand.
Make sure the contractor does a proper evaluation of your home and provides you with the right feedback and recommendations.
Weigh the options carefully to get the correct specifications and unique requirements for your home. Record the right measurements are also recorded to project the number of materials needed.
Hire a Reputable Company
The best Minnesota roofers provide you with a detailed worksheet which you are required to fill out for a smooth and detailed work program.
The company you hire should be committed to providing the highest work standards possible during and after installation.
This is geared towards avoiding any breaches in regards to your privacy and property.
Prepare Your Home
Your home requires adequate and appropriate preparation before any installation job commences. Skilled craftsmen from the construction company will remove all shutters, fixtures, and doorposts.
They will replace rotten wood, loose boards, and old siding and wood trim. Remember to use aluminum trim coil and other water-resistant material.
Then strapping, also called furring, is applied to provide an even base for siding. This must be carried out along all sides of door and window frames, top, bottom, and corners of areas to be renovated.
A weather-resistant barrier over the sheathing must also be applied if it was prescribed by building codes, and insulation is reinforced over the old siding, between, or over the furring strips.
The lowest point of the wall is then identified as the starting point for your new vinyl siding.
The Actual Installation
Skilled roofers always ensure that they have a project foreman on-site to provide you with any necessary information, and to monitor and maintain the highest possible level of workmanship.
The company’s crew should also be presentable, and willing to handle your property with utmost care. They should also respect your privacy rights.
Since vinyl siding expands and contracts with temperature changes, it is important to allow extra gaps between siding panels for expansion and prevent the sides from buckling on hot days or months.
The installation procedure is concluded by excellent trim detailing. It is important to clean up the workspace after the installation exercise.
Post Installation Follow-Up
The installation company should also be ready to answer any question or address any concern you may have after the installation procedure.
Only work with a company that prioritizes your needs and expectations. They should deliver 100% customer satisfaction with a guarantee of free follow-up services or repairs if the work is not done to your satisfaction.
Although vinyl siding requires little maintenance work after installation, make sure that the company provides follow-up services when necessary.